Mitsubishi MOTORS M.U.T.-III Owner's Manual page 95

Reprogramming Operation ( V.C.I. - PC connection )
Drive Directory
selection selection
side side
(c). Reprogramming Data Selection
To select the reprogramming data from arbitrary directories.
(1) Press Reprogramming Data Selection button on the
function menu, then the left screen appears.
-- to select arbitrary drive and directory
On this screen, select an appropriate data file and press
to start transferring the data into V.C.I memory.
Note:
-The displayed data as default is in the folder shown below.
C:¥Program Files¥MUT3¥RPGDATA
This directory is the default reprogramming data pool of
M.U.T.-III, referred from 9-4-1, 9-5-2(a),(b),(d).
-After completing the data transfer, ECU reprogramming will
start sequentially. (refer to 9-5-3.)
(2) Data selection
Select a drive on the left chart, and the directories in the
drive are displayed on the right chart.
-To move to a lower directory, select appropriate row on the
right chart and press
-To move to an upper directory, select
chart and press
Select appropriate directory name row on the right chart,
and press
contained in the directory.
88
button.
button.
button to return to (1) and list the files
(2)
row on the right