Reprogramming Operation ( V.c.i. Alone ) - Mitsubishi MOTORS M.U.T.-III Owner's Manual

9-4. Reprogramming Operation ( V.C.I. alone )

Reprogramming Operation ( V.C.I. alone )
9-4-1. Data transfer (PC --> Memory Card)
(1) Start up the M.U.T.-III system.
Insert the Memory card (MB991853, MB992228) into the
Card Adaptor (MB991939), and then insert them into
m-card slot on PC.
(2) Press Special function button on STV Top Menu.
(3) Select System Function tab,
and press ECU reprogramming button.
Caution:
-In case an update CD-ROM is set in the PC with update
undone, data update starts. (refer to 9-3-1(4))
(4) Press Memory card transfer button.
ALL reprogramming data in the M.U.T.-III PC are transferred
to the memory card.
Caution
-Do not remove the memory card from PC.
(5) Select a memory card drive, and press
transferring.
79
button to start