Chapter 11 Measurement Functions; Injector-Type Fuel Consumption Measurement - Mitsubishi MOTORS M.U.T.-III Owner's Manual

Chapter 11 Measurement Functions

11-1. Injector-Type Fuel Consumption Measurement

When this function would be used with the vehicle where the fuel consumption
measurement data is not outputted to diagnostic connector, the message of "Function is
not supported" is displayed.
Injector-Type Fuel Consumption Measurement
11-1-1. Function Select
(1) Press Special function button on the STV Top Menu
(illustrated on 3-2), then select Measurement Functions
tab on the upper part of the screen.
Press Fuel consumption measurement (Injection)
button on this menu screen.
(2) Function Selection
11-1-2. Measurement in Real-time
(1) Preparations Prior to Measurement
Set the sampling interval, and select the displayed unit of
measurement by pressing the
If you wish to select display items, press
When the setting complete, press
Note:
The amount of recording time is proportional determined
by the length of the sampling interval.
(2) Entering and Recording Record Information
Enter your user name and the vehicle model type.
Measurements in Real-time
Data Display -- to 11-1-3.
Analyze -- to 11-1-4.
Print out -- To print out the view graph.
Data storing -- To load the data, which is stored in a
removal disk, onto the PC.
button starts the measurement process.
100
-- to 11-1-2.
buttons.
button.
button.