Chapter 5 Special Function (Calibration & Setting)
5-1. ECU Information
5-2. Learned Value Reset
ECU Information / Learned Value Reset
5-1-1. Displays ECU Information (KWP2000 on CAN only)
(1) Function Select
Select a system on the System Selection screen.
(For instruction on how to select a system, refer to 3-3-1)
Then press
selection menu of the selected system.
(2) Special Function menu Select
Press ECU Information button.
(3) The table of ECU Information appears.
5-2-1. Learned value reset
(1) Special Function menu Select
Press Learned value reset button.
(2) Select a reset item, and press
38
Special Function
button.
button on Function