Mitsubishi MOTORS M.U.T.-III Owner's Manual page 92

In Progress
STEP1 .......
In Progress
STEP2 .........
In Progress
STEP3 .........
In Progress
STEP4 .........
In Progress
STEP5 .........
Part# MD351868
ROM-ID 120926
Turn IG SW OFF,
please wait...
Completed!
Restart engine.
Reprogramming Operation ( V.C.I. alone )
(2) 5 steps progress is displayed while reprogramming.
Caution:
• Do not press any key during reprogramming automatically
proceeding.
• Do not turn off V.C.I power or IG switch during
reprogramming.
STEP1: Saving the data to the back up memory.
STEP2: Erasing data in ECU.
STEP3: Writing reprogramming data
STEP4: Verifying the data between ECU and V.C.I.
STEP5: Erasing diagnosis code and back up memory
(3) On completion of the 5steps, new reprogrammed ECU parts
No. and ROM-ID are displayed.
Turn IG switch LOCK (OFF).
Note:
Diagnosis code might be memorized in ECU if without
turning IG switch Lock (off)
(4) ECU reprogramming completed
Verify the system properly operated by starting engine.
Enter key: V.C.I. restart
85