Mitsubishi MOTORS M.U.T.-III Owner's Manual page 96

Reprogramming Operation ( V.C.I. - PC connection )
(d). Search
To search the reprogramming data by inputting ECU Part No.,
ROM-ID, or Data No.
(1) Press Search
Note:
(2) Results
9-5-3. Reprogramming ECU (V.C.I. --> Vehicle ECU)
button on the function menu, then the left
screen appears.
Input search key info in the input column, then press
button.
• To input, 2 ways can be taken.
-By PC keyboard
-By virtual keyboard --press
• Some info need to be a combination with the other info for
data search
- Current ECU P/N & ROM-ID need to be together.
- Data No. needs no other info.
Select appropriate data with scrolling the list using
buttons and press
transferring the data into V.C.I memory.
--10 lines scrolling
-After completing the data transfer, ECU reprogramming will
start sequentially. (refer to 9-5-3.)
Note:
Press OK button when message window of device removal
warning comes out at start and end of data transfer.
Operate with
corner of the screen) according to directions of screen
display.
The same operation as 9-4-4. need to be performed on PC
screen.
89
button to start
buttons (in the lower right