Mitsubishi MOTORS M.U.T.-III Owner's Manual page 94

Reprogramming Operation ( V.C.I. - PC connection )
9-5-2. Data Search & Transfer (PC --> V.C.I.)
(a). Automatic Data Search
(1) Press
(2) Result of the search appears.
(b). Database File display
(a). Automatic Data Search
(b). Database File display
(c). Reprogramming Data Selection
(d). Search
Automatic Reprogramming (K-line)
the function menu, then the left dialog box appears.
Verify the connection of V.C.I. and harness, and press
button. Applicable reprogramming data is searched from
database installed in PC automatically.
Select an appropriate data file with scrolling the list using
to start transferring the data into V.C.I. memory.
-After completing the data transfer, ECU reprogramming will
start sequentially. (refer to 9-5-3.)
Note:
Press OK button when message window of device removal
warning comes out at start and end of data transfer.
Press Database File Display (K-line)
function menu, then the left screen appears.
-Reprogramming data files in the hard disk are listed.
-Select an appropriate data file with scrolling the list using
to start transferring the data into V.C.I memory.
--10 lines scrolling
-After completing the data transfer, ECU reprogramming will
start sequentially. (refer to 9-5-3.)
Note:
Press OK button when message window of device removal
warning comes out at start and end of data transfer
87
buttons, and press
button on the
buttons, and press
button on
button
button