Chapter 2 M.u.t.-Iii Functions; Basic Functions - Mitsubishi MOTORS M.U.T.-III Owner's Manual

Chapter 2 M.U.T.-III Functions

2-1. Basic Functions

Can be used with all vehicle installed electronic control systems (with built-in diagnostic functions)
from model year 1984.
Function
DTC readout
Data List
Actuator tests
Simulated
vehicle speed
Drive Recorder
Voltmeter
Ohmmeter
SWS Diagnosis
CAN Bus Diagnosis
ECU Reprogramming
Electronic service
information
Tension meter
Fuel pressure meter
Fuel consumption
measurement
Basic Functions
Reads various diagnostic codes and displays the codes by name and
number.
Reads RAM data inside ECU and displays the data in digital and graphic
form. (Available with ECUs that support serial communication only)
Permits forced operation or shutdown of various types of actuators that is
required for service.
(Available with ECUs that support serial communication only)
Outputs vehicle speed signal to appropriate ECUs facilitating diagnosis
without travel.
Permits recording and displaying arbitrary service data that is determined
for an arbitrarily specified time.
Permits measurement of DC voltage within the range of 0- ±40V using
the voltage measurement function.
Permits measurement of resistance within the range of 0-100KΩ using
the resistance measurement function.
Permits SWS diagnosis using the SWS monitor kit (MB991806).
Identifies CAN bus failures that occur in vehicle that is subject to the
diagnosis and narrows down a cause.
Permits updating programs in ECU for system version upgrade.
Displays with Service manual data.
In addition, the system supports interactive fault diagnosis. The Interactive
Diagnosis permits user to use both the scan tool viewing functions and
service manual troubleshooting procedures.
(Not available in US)
Permits measurement of belt tension using Belt tension meter set
(MB991668). * Belt tension meter set had ended production.
Permits measurement of fuel pressure using a pressure gauge set
(MB991637 / MB991981), and displays it on PC. (Not available in US)
Permits more precise measurement of fuel consumption by measuring
injection quantity of fuel injector.
8
Synopsis