Mitsubishi MOTORS M.U.T.-III Owner's Manual page 54

How to Record the Data
(18) Starting Recording
To start recording, turn off the engine first, and then turn the
ignition switch ON or start the engine and turn the V.C.I.
power switch ON. Recording begins after communication
initialization.
Note:
-The number in parenthesis on the V.C.I. LCD screen
indicates the recording area of the V.C.I. drive recorder.
(19) Trigger
-With a manual trigger, pressing the V.C.I. Enter key
activates the trigger, displaying "T" on the screen. Once the
trigger has been activated, the data after the time of the
trigger are recorded.
Note:
-With a diagnostic trigger, the trigger is automatically
activated when the specified diagnostic code is generated.
-With a threshold trigger, the trigger is automatically
activated when the specified conditions are met.
(20) Ending Recording
If you wish to end recording, regardless of whether or not
the trigger has already been generated, press the V.C.I.
ESC key.
Once the button has been pressed you can disconnect the
vehicle harness and trigger harness.
(21) When you check the data recorded in V.C.I.,
continue to 6-2-1.
47