Mitsubishi MOTORS M.U.T.-III Owner's Manual page 57

How to Record the Data
(6) When "Diagnosis Code Trigger" is selected in (5), the left
screen appears.
• Select an item to be the trigger, and press
-- to (8). (If Threshold Trigger is selected as well, go to (7))
(7) When "Threshold Trigger" is selected in (5), the left screen
appears.
• Select an item and edit conditions in Condition Editing table
appearing at the bottom of the screen. (refer to 6-1-1(7))
• Then, press
are of Condition of Trigger table.
(Condition of Trigger table can include up to 8 conditions)
• When completed the setting, press
(8) PC Drive recorder setup
• Please confirm the contents of record setting, and set up
the sampling interval with the cursor or
• Select a display format for recording (either Graph or Text)
having a circle marked "
--Displaying item Select ('Graph' only)-- to (9)
--OK -- to (10)
Note:
-The sampling interval time indicates the data-recording
interval for one item. A setting of "0 sec" (fastest) results in
the fastest sampling interval.
-Recordable time computes the number of the maximum
record points as 20000 points, and is displayed. This is the
prediction time on calculation and differs from actually
recordable time.
-The configuration of the displayed file names is DR+ Year
Month Day + Time (military time including seconds), using
the PC time.
<DR: The file saved by the drive recorder is meant>
-The setting value of a sampling interval can be chosen
from 0sec(fastest)/1sec/10sec/1min.
50
button to set the condition into selected
".
button.
button.
button.