Mitsubishi MOTORS M.U.T.-III Owner's Manual page 90

<Main Menu>
3 Load RPG file
<File Selection>
001 VN02031.rpg
002 VN01111.rpg
003 VN01093.rpg
VN02031.rpg
Rewrite ECU?
Loading
****
ECU
Reprogramming
Working,
please wait
<Main Menu>
2 ECU Reprogram
ECU
Reprogramming
Reprogramming Operation ( V.C.I. alone )
(b). Select and Load Data
(1) Select "Load RPG file" in main menu by
Enter key.
(2) Select a reprogramming data file by
key.
Esc key： Move back to main menu.
Remark:
-The data files are displayed in numeric order of data No..
(From big to small; new to old)
(3) Reconfirm the data file No., and press Enter key to start
transferring the data into V.C.I. built-in-memory.
Esc Key： Cancel
(4) Progress is displayed on monitor
* mark is increased by steps.
(5) After completing data transfer, ECU reprogramming starts
sequentially.
For next steps, refer to 9-4-4.
(c). (Special case)
(1) If V.C.I. has already stored the reprogramming data, select
"ECU Reprogram" in main menu, and press Enter key.
(Refer to 9-4-2.(2)-(4) for setting up the equipments.)
Reprogramming data file No. and program version No. in
the V.C.I. memory are displayed for a few seconds, and
then ECU reprogramming starts sequentially.
For next steps, refer to 9-4-4.
83
key, and press
key, and press Enter