Recorded Data Handling - Mitsubishi MOTORS M.U.T.-III Owner's Manual

6-2. Recorded Data Handling

Recorded Data Handling
6-2-1. Transmit data on V.C.I. to PC
To view the data recorded on V.C.I., you need to transfer it
from V.C.I. to PC first. Connect V.C.I. and PC using a USB
cable and operate following procedures.
(1) You can transfer the data using only V.C.I. and PC, without
connecting to the vehicle. Press Special Function button
on the STV Top Menu.-- to (2)
Or, if the V.C.I. is already connected to the vehicle, you can
press Data display from the function menu of the recorded
system to regenerate the data. (refer to 6-1-1(3)) -- to (4)
(2) Select the System Functions tab on the upper part of the
screen, and then press Drive Recorder (Display only)
button.
(3) Press Data display button.
(4) File List
Press button.
54