Chapter 1 Product Overview; Precautions - Mitsubishi MOTORS M.U.T.-III Owner's Manual

Chapter 1 Product Overview

1-1. Precautions

• Be sure to follow all basic service work precautions when using M.U.T.-III during vehicle
inspection and service work.
• For detailed information regarding service work precautions, refer to the service instruction
manual of each vehicle.
• When performing vehicle inspection work at the work site with the engine running, either use an
exhaust gas discharger or ventilate the area sufficiently.
• When working on a vehicle, be sure to apply the parking brake and set wheel chocks in place to
prevent the car from moving.
• If you wish to use M.U.T.-III while driving the target vehicle, first verify that all parts are properly
assembled.
• While driving, always have an assistant operate M.U.T.-III.
• Be sure that the M.U.T.-III main harness and other cables will not interfere with driving.
• Install and remove the PC and V.C.I. with the vehicle parked, IG switch OFF.
PC Usage Limitations
• The M.U.T.-III PC is a special service tool. Do not install any software other than M.U.T.-III
software onto the unit. Installation of other software results in the risk of M.U.T.-III system
failure.
• Any unauthorized software will not be supported.
unauthorized software will be charged additional technical support fees to return the unit to its
authorized state of operation.
• All unauthorized software will be erased with each new upgrade.
Precautions
Service Work Precautions
Work Precautions
Driving Precautions
Do Not Install Software on the PC
1
Technical support for units with