Mitsubishi MOTORS M.U.T.-III Owner's Manual page 87

Reprogramming Operation ( V.C.I. alone )
(6) Press
the memory card. Are you ready?" appears
(7) Data transfer
The progress bar is displayed during the transfer.
(8) The data transfer is complete.
Press
(9) Before you remove the memory card, double-click the
below icon for removal of the adaptor.
(10) Select [PCMCIA IDE/ATAPI Controller] or the other
appropriate device, then press
button when the message "It transfers data to
button.
Double click here
80
Stop button.