Table of Contents
Advertisement
Menu 10 to 1F
1D
1E
1F
The rotary switch
The rotary switch gives you access first to the menu level and then to the menu item
C
The push-buttons
The push-buttons allow you to change the value of a menu item. Use the RED (+) button to
adjust a value up; the BLUE (–) button to adjust a value down; or press both
simultaneously for special applications. For a table showing the combinations of rotary
switch positions and button presses used to carry out different functions, see page 48.
Access to a menu item:
Notes:
•
For a detailed description of each menu item, see
starting page 61: the functions of the menu items are illustrated in the application
example on page 96.
•
Change over from Menu LEVEL 0 to Menu LEVEL 1 is only possible at position 0,
from menu item 00 to 10 or vice-versa. (See page 50 for detailed instructions.)
1.
First select Menu LEVEL 0 or Menu LEVEL 1.
2.
Turn the rotary switch to the number of the desired item.
1.
For a chart showing the rotary switch positions and related functions when Fail-
Safe High or FailSafe Low mode is selected, see page 48. (If Free Programming
Mode is selected, see
on page 111.)
Page 44
Description
(non-operational)
Select FailSafe High / Low (FSH/FSL) or
Free Programming Mode (FPM)
Keylock Level
The rotary switch has a small slot where the current position can
be read. The positions are read clockwise, and in increasing order:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. The position wraps from F
to 0.
The switch can be moved in either direction. When it is turned to a
new position, the LCD displays the new menu selection for one
second, followed by the data for that position.
Certain menu selections return more than one piece of information
per item: in that case the display alternates between the two
values, for example, PV Value / Fault status.
Rotary Switch Positions – Quick Reference (FPM Mode)
Pointek CLS500 – INSTRUCTION MANUAL
Menu Group
Miscellaneous
Appendix A: Menu Groups
7ML19985GG03
Details
81
82
1
.
Advertisement
Table of Contents
