Service; Properties - Citronix ci5200 Technical & Service Manual

(4)

Service

The service screen gives access to various functions and settings for each of the printer's
subsystems. It is typically used by the service engineer during maintenance and repairs. It
consists of the following screens:
The following controls are used to calibrate, test, and set printer specific settings and
configurations. These settings should only be changed by a Citronix trained service engineer.
1. Service
2. Flush Prime
3. Override
4. Test Valves
NOTE: Further troubleshooting/testing and adjustments explained in SECTION 6 Cleaning and
Maintenance/Service Routines
(5)

Properties

The Properties screen is used during installation to configure a printer for a given production set
up. It is used for setting up interfacing with accessories (such as photocells, encoders and
beacons) and external communications (such as Ethernet or RS232). This is usually set up by
the service engineer.
Version 0.1
ci5000 Series Printer Technical Service Manual
The system configuration screens.
5. Run Pump
6. HV Trip Set
7. Configure
8. Advance Service
2-8