Videojet Emulation - Citronix ci5200 Technical & Service Manual

Shift 2: HH MM SS (enter start time for beginning of shift 2)
Code: XXX (enter up to three character code for shift 2)
Shift 3: HH MM SS (enter start time for beginning for shift 3)
Code: XXX (enter up to three character code for shift 3)
Example string:
SHn,bbbbbb,xxx,eeeeee,xxx,cccccc,xxx<CR>
Explanation:
n = SHIFT number
bbbbbb = Shift 1 BEGIN time in HHMMSS format
xxx = Shift 1 code (any three characters)
eeeeee = Shift 2 BEGIN time in HHMMSS format
xxx = Shift 2 code (any three characters)
cccccc = Shift 3 BEGIN time in HHMMSS format.
xxx = Shift 3 code (any three characters)
SI (Select Interactively)
This command allows selection of a Message after the list of messages have been delivered to the host
device via number of messages in the list.
Example output:
Available Messages (left column number)
Enter Selection->(x to exit)
SM (Select Message)
This command allows selection of a Message for printing remotely by Message name or Message
number.
Example string: SMmessagename<CR>
NOTE: If the name is not found, the Printer will list all the messages in the Printer.

Videojet Emulation

When operating in One-For-One mode, the Printer requires new data for each printed message. The
normal format of this data is the MD (Message Data) command.
The Printer also supports three modes of emulation for VideoJet (VJ) data. The VJ Emulation Interface
Property can be set to:
Version 0.1
ci5000 Series Printer Technical Service Manual
sel Date
1 11/29/2020
2 11/29/2020
3 12/5/2020
4 00/00/0000 0:00
Time Name
12:16 1
12:16 2
12:24 *Test
DEFAULT
7-11