Ethernet - Citronix ci5200 Technical & Service Manual

ci5000 Series Printer Technical Service Manual
The Citronix version and time header is only displayed if a serial connection is open before the Printer is
powered on; otherwise, the terminal will be blank.
Type in the "ST" command followed by a carriage return to get the Printer status.

Ethernet

The Ethernet connection is made to the P1 connector. This is a standard RJ45 connector. If the Printer is
to be directly connected to a computer, a crossover cable must be used. If the Printer is to be connected
to an Ethernet hub, switch or router, a standard Ethernet cable must be used.
Version 0.1 7-4