Speed - Citronix ci5200 Technical & Service Manual

Field
Ball Fall Time
Last Time
Calibration Constant
Measured
Set Point
Next Check
Ball

Speed

This screen displays print speed information and when an Encoder is used, can help to properly "Dial in"
the print speed so the width of the printed message does not change in length.
Version 0.1
Description
Shows status of viscosity
Ball drop time
Calibration setting – calibration is obtained
from the viscometer. Calibrated at factory.
Measured viscosity
Target viscosity
Time until next viscosity check
Position of the ball
ci5000 Series Printer Technical Service Manual
Options
High, Low or OK
Steady, Rising or Falling
Time in seconds
Calibration number
Viscosity in CentiPoise
Viscosity in CentiPoise
Time in seconds
High or Low
Known or Unknown
3-73