The following peripheral devices may be required between the AC main circuit power supply and the Drive input
terminals L1(R), L2(S), and L3(T). Refer to applicable codes to determine the devices necessary for a given
installation. Use Table E.1 or E.2 when selecting fuses and circuit breakers per the NEC. When selecting
semiconductor fuses to provide Drive input I
short circuit protection requirements, select one of the fuses in Table E.3 or E.4.
Fuse Type:
Circuit Breaker Type:
Table E.1 Recommended Fuse and Circuit Breaker Ratings per NEC (208-240Vac Input)
Model
Hp
CIMR-P7U
20P4
0.5/0.75
20P7
1
21P5
1.5/2
22P2
3
23P7
5
25P5
7.5
27P5
10
2011
15
20
2015
25
2018
30
2022
40
2030
50
2037
60
2045
75
2055
75/100
2075
2090
125
2110
150
*1 Input and Output Amps are based on the Normal Duty (ND) current rating. Consult the Specification section for details on the Heavy Duty (HD) and Normal Duty (ND) ratings.
2
t protection and comply with UL, CSA, NEC, and CEC branch circuit
UL designated Time-Delay or Non-Time-Delay Fuse
Class:
Designators (typical):KTK, FNQ, FRS, LPJ, LPS, JKS, JJN, or JJS