Download  Print this page

Attachment Of Thread Tension Dial Assembly - Brother SL100 Service Manual

Hide thumbs


Basic of Assembly

Attachment of Thread tension dial assembly

1. Attach the thread tension dial assembly to the arm bed with the two screws (taptite, bind S M4X10).
*Key point
• Confirm that there is "A" of upper tension control releaser on the upper side of presser foot lifter as shown in
the illustration below.
2. Hang the spring (XF3522) to the tension control holder assy and the zigzag connecting rod.
Refer to 3 - 42 Assembly of Thread tension dial assembly.
Taptite, Bind S M4X10
Spring (XF3522)
Presser foot lifter
Tension control holder assy
Thread tension dial assembly
Taptite, bind S M4X10
Needle threading mechanism
Upper tension control releaser
2 - 33
Spring (XF3522)
Zigzag connecting rod


Table of Contents

   Related Manuals for Brother SL100

Comments to this Manuals

Symbols: 0
Latest comments: