Download  Print this page

Main Frame And Covers; Removal Of Face Plate Assy And Front Cover Assy - Brother SL100 Service Manual

Hide thumbs

Advertisement

Basic of Disassembly
1

Removal of Face plate assy and Front cover assy

1. Remove the screw (taptite, cup P M4X20) from the rear cover side, and then open the bottom side of
face plate assy to remove the face plate assy from the rear cover assy.
Refer to 3 - 3 Disassembly of Face plate assy.
2. Remove the pattern selecting dial from the shaft of pattern selecting unit assy.
3. Remove the screw (screw, pan (S/P washer) M3X6) from the front cover side. And remove the three
screws (taptite, cup P M4X20) and screw (taptite, bind P M3X16) from the rear cover side.
4. Release the five hooks of front cover assy from the five hook trays of rear cover assy, and then open
the bottom side of front cover assy to remove the front cover assy from the rear cover assy.
Refer to 3 - 4 Disassembly of Rear cover assy.
Taptite, cup P
M4X20
Taptite, bind P
M3X16
Taptite, cup P
M4X20
Rear cover
assy

Main frame and Covers

Taptite, bind P M3X16
Taptite, cup P M4X20
(Face plate assy)
Taptite, cup P M4X20
Hook trays
Hooks
Face plate assy
2 - 4
Rear cover assy
Hook tray
Shaft of pattern
selecting unit assy
Hook trays
Screw, pan (S/P washer) M3X6
Taptite, Cup P M4X20
Screw, Pan (S/P washer) M3X6
Taptite, Bind P M3X16
Front cover assy
Hooks
Pattern
selecting dial

Advertisement

Table of Contents

   Related Manuals for Brother SL100

Comments to this Manuals

Symbols: 0
Latest comments: