Removal Of Feed Module - Brother SL100 Service Manual

Basic of Disassembly
2

Removal of Feed module

1. Remove the spring (XF5134) from the feed adjusting shaft of feed connecting lever assy and the arm
bed.
2. Remove the three screws (screw, pan (S/P washer) M4X10) from the feed module. And lift up the feed
module to remove it from the two bosses on arm bed, and slide it in the direction of the arrow to remove
the feed adjuster of feed module from the feed adjusting shaft of feed connecting lever assy.
→
Refer to 3 - 11 Disassembly of Feed module.
Bosses
Feed module
Screw, Pan (S/P washer) M4X10
Feed unit / Feed control
Pin
Feed adjusting
shaft
2 - 12
Spring (XF5134)
Spring
(XF5134)
Screw, pan
(S/P washer) M4X10