4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
26 –
Exhaust system
1
Assembly overview - parts of the exhaust system
1 - Seal
❑ Renew.
2 - Catalytic converter
❑ Protect catalytic con‐
verter from damage by
knocks and impact
❑ Removing and installing
⇒ page 240
.
❑ Aligning exhaust sys‐
tem free of tension
⇒ page 243
.
3 - Exhaust pipe bracket
4 - Bolt
❑ 20 Nm
5 - Nut
❑ 40 Nm
❑ Renew.
❑ Coat studs of turbo‐
charger with high-tem‐
perature paste.
❑ High-temperature paste
⇒ Electronic parts cata‐
logue .
6 - Centre silencer
❑ Cutting point
⇒ page 242
❑ Aligning exhaust sys‐
tem free of tension
⇒ page 243
.
7 - Mounting
❑ Renew if damaged.
❑ Check pretension
⇒ page 243
8 - Rear silencer
❑ Aligning exhaust system free of tension
9 - Rear clamp
❑ Align exhaust system free of tension before tightening
❑ Installation position
❑ Tighten bolted connections evenly.
10 - Bolt
❑ 20 Nm
11 - Retainer
12 - Front clamp
❑ Align exhaust system free of tension before tightening
❑ Installation position
⇒ page 243
⇒ page 240
.
⇒ page 240
.
.
⇒ page 243
.
⇒ page 243
.
1. Assembly overview - parts of the exhaust system
Amarok 2011 ➤
239