Volkswagen Amarok 2011 Workshop Manual page 113

4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Pull off valve stem seals using valve stem seal puller -3364- .
– If valve stem seal puller -3364- cannot be used on account of
restricted space, knock out pin -arrow- with a punch and re‐
move the impact extractor attachment.
– Place lower part of valve stem seal puller -3364- onto valve
stem seal.
– Insert punch -1- into bore in lower part of puller.
– Place installation lever on puller and pull out valve stem seal
-arrow-.
Installing valve stem seals
– To prevent damage to new valve stem seals -B-, attach plastic
sleeve -A- to valve stem.
– Lubricate sealing lip of valve stem seal -B-, place it in the valve
stem oil seal fitting tool -3365- and push carefully onto valve
guide.
– Remove plastic sleeve -A-.
– Insert valve spring and valve spring plate.
– Install removal and installation device for valve cotters -VAS
5161- as shown.
Amarok 2011 ➤
107
3. Valve gear