4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Unscrew nuts -2- from filler neck -1- at top of tank flap unit cut-
out.
– Remove filler neck -1- from below; filler neck must be turned
when doing this.
Installing
Install in reverse order.
– Thread filler neck -1- in through wheel housing and position at
top of tank flap unit cut-out with nuts -2-.
– Tighten nuts -2- to 5 Nm.
– Tighten bolt -2- to 2 Nm.
– Installing fuel tank:
– Push hose -1- of filler neck onto connection on fuel tank -3-.
– Position clamp -2- at assembly markings -arrows- using hose
clip pliers -VAS 6362- .
Amarok 2011 ➤
175
3. Fuel tank