Volkswagen Amarok 2011 Workshop Manual page 34

Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
♦ Counterhold tool -T10355-
Removing
– Remove poly V-belt
– Remove engine guard, if fitted ⇒ Body, front; Rep. gr. 50 ;
Engine guard .
– Turn vibration damper to „TDC" position -arrow- using coun‐
terhold -T10355- .
• Notch on vibration damper must align with arrow marking on
cover for timing chains (bottom).
– Remove bolt for vibration damper using counterhold -
T10355- .
Caution
Risk of damage to engine.
♦ To avoid disturbing valve timing, do not turn crankshaft out
of „TDC" position when vibration damper is removed.
Installing
• Specified torque ⇒ page 19
Installation is carried out in the reverse order; note the following:
Note
Renew bolt for vibration damper.
♦
Renew O-ring -1-.
♦
– Lubricate sealing lip of oil seal with gear oil.
– Fit vibration damper (pay attention to shape of tooth -arrow-).
28
Rep. gr.13 - Crankshaft group
⇒ page 22 .
.