Volkswagen Amarok 2011 Workshop Manual page 107

4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Undo and remove cylinder head cover bolts in the sequence
-1 ... 6-.
– Remove cylinder head cover.
– Detach camshafts.
Caution
Danger of soiling lubrication system and bearings.
♦ Cover open parts of engine.
Installing
• Specified torques ⇒ page 92
Note
Sealing surfaces must be free of oil and grease.
♦
Pistons must not be positioned at TDC.
♦
Ensure that all roller rocker fingers are properly seated on
♦
valve stem ends.
– Remove sealant remaining on cylinder head with flat scraper.
WARNING
Risk of eye injury.
♦ Wear safety goggles.
Caution
Danger of soiling lubrication system and bearings.
♦ Cover open parts of engine.
– Remove sealant left in groove of cylinder head cover and on
sealing surfaces, e.g. using a rotating plastic brush.
– Clean sealing surfaces. They must be oil and grease free.
– Oil running surfaces of both camshafts.
.
Amarok 2011 ➤
101
3. Valve gear