Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Cut off nozzle on tube at front marking (∅ of nozzle approx.
3 mm).
– Apply silicone sealant -D 174 003 A2- onto clean sealing sur‐
face of upper part of sump, as illustrated -arrow-.
•
Thickness of sealant bead: 2...3 mm
Note
The sump upper part must be installed within 5 minutes of ap‐
♦
plying silicone sealing compound.
The bead of sealant must not be thicker than specified, other‐
♦
wise excess sealant can enter the sump and obstruct the
strainer in the oil intake pipe.
•
Sump upper part and crankcase must be flush on gearbox
side.
– Fit sump upper part immediately and tighten bolts -1 to 14- in
3 stages as follows:
1 -
Tighten bolts hand tight.
2 -
Tighten bolts to 15 Nm.
3 -
Turn bolts 90° further.
– Install bolts -arrows-. Specified torque.
126
Rep. gr.17 - Lubrication