Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
2
Turbocharger
Note
Secure all hose connections with hose clips comparable to
♦
production standard
Hose connections and hoses for charge air system must be
♦
free of oil and grease before assembly. The oil seal and seal‐
ing surface must be oiled lightly only for connector couplings .
Charge air system must be free of leaks.
♦
Renew self-locking nuts.
♦
Hose clip pliers -VAS 6362- or hose clip pliers -V.A.G 1921-
♦
are recommended for installation of spring-type clips.
Fill turbocharger with engine oil at oil supply line connection.
♦
After installing turbocharger, run engine for about 1 minute at
♦
idling and do not rev up immediately, this ensures that the tur‐
bocharger is fully primed with oil
Observe rules for cleanliness
♦
2.1
Assembly overview - turbocharger
Part I
Part II
⇒ page 194
Part III
⇒ page 195
192
Rep. gr.21 - Turbocharging/supercharging
⇒ page 183
.