Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
Inlet side
Exhaust side
Note
If the valve cotters have been removed from the installation
♦
cartridge, they must first be inserted into the insertion device
-VAS 5161/18- .
Press assembly cartridge -VAS 5161/8- onto insertion device
♦
from above and pick up valve cotters.
– Press installation cartridge -VAS 5161/8- down with pressure
fork -VAS 5161/2- , and turn installation cartridge knurled
screw back and forth whilst pulling upwards.
– Relieve pressure fork -VAS 5161/2- whilst pulling on knurled
screw.
– Remove removal and installation device -VAS 5161- .
Perform assembly analogously in reverse order of removal. When
doing this, observe the following:
– Install camshafts
⇒ page 94
108
Rep. gr.15 - Cylinder head, valve gear
.