Volkswagen Amarok 2011 Workshop Manual page 202

Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
❑ Coat exhaust manifold studs with high-temperature paste; high-temperature paste ⇒ Electronic parts
catalogue
14 - Clamping rail
Tightening sequence - turbocharger
– Tighten bolts in sequence -1 to 5- in 4 stages as follows:
1. Tighten bolts to 5 Nm.
2. Tighten bolts to 12 Nm.
3. Tighten bolts to 16 Nm.
4. Tighten bolts to 25 Nm.
Part IV
Part I ⇒ page 192
Part II ⇒ page 194
Part III ⇒ page 195
1 - Turbocharger
❑ Can only be renewed to‐
gether with exhaust
manifold and vacuum
unit as one unit
❑ Removing and installing
⇒ page 197 .
2 - Vacuum unit for turbocharg‐
er
❑ Check ⇒ page 200
❑ Removing and installing
⇒ page 200 .
3 - Bolt
❑ 10 Nm
4 - Nut
❑ 9 Nm
❑ Secure with sealing
wax; sealing wax ⇒
Electronic parts cata‐
logue .
5 - Locking plate
❑ Renew.
6 - Knurled nut
196
Rep. gr.21 - Turbocharging/supercharging
.