Volkswagen Amarok 2011 Workshop Manual page 29

4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
Removing
Caution
If a used belt runs in the opposite direction when it is refitted,
this can cause breakage.
♦ Before removing, mark direction of rotation of poly V-belt
with chalk or felt-tipped pen for re-installation.
– To slacken poly V-belt turn tensioner in direction of -arrow-.
– Lock tensioner with locking tool -T40098- .
– Remove poly V-belt.
Installing
Installation is carried out in the reverse order. When installing,
note the following:
Note
Alternator and air conditioner compressor must be firmly mounted
before poly V-belt is installed.
– Fit poly V-belt as shown in figure.
Vehicles with air conditioner
Vehicles with no air conditioner
Amarok 2011 ➤
1. Cylinder block (pulley end)
23