Volkswagen Amarok 2011 Workshop Manual page 222

Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Detach vacuum hose -1- at disconnection point -2-.
– Remove crankcase breather hose -3-.
– Detach vacuum hose -3- from vacuum pump -2- and brake
servo.
– Open spring-type clip -upper arrow- and detach fuel pressur‐
isation line from high-pressure pump.
– Loosen union nut of high-pressure fuel line -lower arrow- at
high-pressure pump.
Note
Fuel system must be depressurised.
♦
Collect escaping fuel with a clean cloth.
♦
Seal open connections with clean caps. It is essential to en‐
♦
sure that no dirt enters the fuel system.
– Disconnect connector from coolant temperature sender -
G62- .
– Unclip wiring harness from support.
– Loosen securing nut -1- and unscrew bolt -2- completely.
216
Rep. gr.24 - Mixture preparation - injection