Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
Note
If the valve cotters have been removed from the installation
♦
cartridge, they must first be inserted into the insertion device
-VAS 5161/18- .
Press assembly cartridge -VAS 5161/8- onto insertion device
♦
from above and pick up valve cotters.
– Press installation cartridge -VAS 5161/8- down with pressure
fork -VAS 5161/2- , and turn installation cartridge knurled
screw back and forth whilst pulling upwards.
– Relieve pressure fork -VAS 5161/2- whilst pulling on knurled
screw.
– Remove removal and installation device for valve cotters -VAS
5161- .
Further assembly is basically the reverse of the dismantling se‐
quence. In the process, note the following:
– Install camshafts
⇒ page 94
3.5
Checking valve guides
Special tools and workshop equipment required
♦ Universal dial gauge bracket -VW 387-
♦ Dial gauge -VAS 6079-
112
Rep. gr.15 - Cylinder head, valve gear
.