Volkswagen Amarok 2011 Workshop Manual page 128

Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Unscrew bolts -1 ... 20-.
– Remove sump; if necessary, loosen using light blows with a
rubber-headed hammer.
Installing
• Specified torques
Note
Observe use-by date of silicone sealant.
♦
The sump must be installed within 5 minutes of applying sili‐
♦
cone sealing compound.
– Remove sealant residues from sump upper part with a flat
scraper.
WARNING
Risk of eye injury.
♦ Wear safety goggles.
– Remove sealant residue from bottom part of sump, e.g. with
rotating plastic brush.
– Clean sealing surfaces until they are all oil- and grease-free.
– Cut off nozzle on tube at front marking (∅ of nozzle approx.
3 mm).
122
Rep. gr.17 - Lubrication