4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
Note
If the radiator -1- is to be replaced, undo bolts of charge air
♦
cooler and remove it from radiator.
Undo and remove bolt -2- on right and left (not shown in illus‐
♦
tration) at radiator.
Installing
– Install in reverse order. In the process, note the following:
Note
Before installing radiator, check that radiator mountings -1- are
correctly seated on front part of car -2- and, if necessary, reposi‐
tion:
– Insert radiator mounting into lock carrier -2- at bottom -1-, do‐
ing so transversely to the direction of travel, and then turn it
90".
– Insert top radiator mountings -1- on right and left into the
mounting on radiator -2- appropriately.
Amarok 2011 ➤
4. Parts of cooling system, body side
157