Renewing Balancer Shaft For Inlet Camshaft - Volkswagen Amarok 2011 Workshop Manual

Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Check adjustment again.
– Check markings on intermediate shaft sprocket/balancer shaft
-arrow-.
Note
For illustration purposes, the markings on intermediate shaft
sprocket/balancer shaft are shown with the chain removed.
Further assembly is basically the reverse of the dismantling se‐
quence. In the process, note the following:
– Install camshaft timing chain
– Install timing chain cover (bottom)
– Install timing chain cover (top)
– Install tensioner for poly V-belt
– Install poly V-belt ⇒ page 22
– Fit engine guard, if available ⇒ Body, front; Rep. gr. 50 ; En‐
gine guard .
2.10 Renewing balancer shaft for inlet cam‐
shaft
Special tools and workshop equipment required
♦ Puller -T10394-
84
Rep. gr.15 - Cylinder head, valve gear
⇒ page 76 .
⇒ page 67 .
⇒ page 67 .
⇒ page 21 .
.