Fuel Supply System; General Notes On Fuel System - Volkswagen Amarok 2011 Workshop Manual

4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
20 –

Fuel supply system

1

General notes on fuel system

General notes on fuel system
Observe safety precautions
Observe rules for cleanliness
1.1 General notes on fuel system
Caution
When doing any repair work, especially in the engine compart‐
ment, pay attention to the following due to the cramped condi‐
tions:
♦ Route all the various lines (e.g. for fuel, hydraulics, acti‐
vated charcoal filter system, coolant and refrigerant, brake
fluid and vacuum) and electrical wiring in their original po‐
sitions.
♦ Ensure that there is sufficient clearance to all moving or
hot components.
Note
When the engine is warm, the cooling system is under pres‐
♦
sure. If necessary, release pressure before beginning repair
work.
Hoses are secured with spring-type clips. In case of repair,
♦
only use spring-type clips.
When installing or removing spring-type clips, we recommend
♦
using spring-type clip pliers -VAS 6340- or
... hose clip pliers -VAS 6362- .
♦
When installing coolant hoses, route stress-free so that they
♦
do not come into contact with other components (observe
markings on coolant connection and hose).
The arrows on the coolant pipes and on the ends of the hoses
♦
must be aligned with each other.
⇒ page 159
⇒ page 160 .
⇒ page 183 .
Amarok 2011 ➤
1. General notes on fuel system
159