Volkswagen Amarok 2011 Workshop Manual page 255

4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
♦ Puller -T40039-
♦ Lubricating paste -G 052 141 A2-
Removing
Note
Observe safety precautions
♦
Assembly overview - ignition system
♦
To detach spark plugs, fit puller -T40039- onto uppermost,
♦
thick rib -arrow- of ignition coils with final output stages.
The lower ribs may be damaged if they are used.
♦
– Pull all ignition coils approx. 30 mm out of spark plug recess
using puller -T40039- .
– Release connectors and simultaneously detach all connectors
from ignition coils -arrows-.
Installing
Note
When fitting new spark plugs, the ignition coil must be re‐
♦
greased using lubricating paste -G 052 141 A2- This will stop
the ignition coil sealing hose from »sticking« to the spark plug.
The lubricating paste must be distributed on the spark plug
when inserting on the ignition coil.
New ignition coils with output stage are lubricated when de‐
♦
livered.
⇒ page 247 .
⇒ page 248 .
Amarok 2011 ➤
1. Repairing ignition system
249