Volkswagen Amarok 2011 Workshop Manual page 12

Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
Caution
When doing any repair work, especially in the engine compart‐
ment, pay attention to the following due to the cramped condi‐
tions:
♦ Route all the various lines (e.g. for fuel, hydraulics, acti‐
vated charcoal filter system, coolant and refrigerant, brake
fluid and vacuum) and electrical wiring in their original po‐
sitions.
♦ To avoid damage to lines, ensure sufficient clearance from
all moving or hot components.
♦ Cut through cable ties carefully and reinstall in the same
position.
– Remove bonnet ⇒ General body repairs, exterior; Rep. gr.
55 ; Bonnet .
– Remove engine guard, if fitted ⇒ Body, front; Rep. gr. 50 ;
Engine guard .
– Remove starter ⇒ Electrical system; Rep. gr. 27 ; Removing
and installing starter .
– Drain coolant ⇒ page 133
– Detach coolant hose -2- with both brackets -1-.
– Unscrew bolts -3-.
– Pull latch -2- back.
– Press retaining lever -1- down and pull connector off.
6
Rep. gr.10 - Removing and installing engine
.