Volkswagen Amarok 2011 Workshop Manual page 234

Amarok 2011 ➤
4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
♦ Torque wrench -V.A.G 1410-
Removing
– Before removing engine control unit, read the control unit iden‐
tification and, with it, the coding of the control unit used up to
now ⇒ Vehicle diagnostic tester.
– Switch off ignition.
– Disconnect battery ⇒ Electrical system; Rep. gr. 27 .
– Remove shear bolts -1- and remove bow -4-.
– Release and pull off connectors -2- and -3-.
– Pull engine control unit out.
Installing
Install in reverse order. In the process, note the following:
– Insert engine control unit.
– Insert and lock connectors -2- and -3-.
– Fit bow -4- and new shear bolts -1-.
– Connect battery ⇒ Electrical system; Rep. gr. 27 .
– Check previous coding and code new control unit ⇒ Vehicle
diagnostic tester.
228
Rep. gr.24 - Mixture preparation - injection