4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
♦ Support bracket -10 - 222 A-
♦ Hand drill with plastic brush
♦ Eye protection
♦ Silicone sealant -D 174 003 A2-
Removing
Note
To remove the sump lower part the engine has to be supported
and raised by approx. 15 cm. This ensures the necessary space
to remove the sump lower part.
– Support engine with support bracket -10 - 222 A- .
– Unscrew bolts for right and left engine mounting
– Raise engine by approx. 15 cm.
– Remove engine guard, if fitted ⇒ Body, front; Rep. gr. 50 ;
Engine guard .
– Drain off engine oil.
Note
Observe environmental regulations for disposal.
⇒ page 17
.
Amarok 2011 ➤
1. Parts of lubrication system
121