Volkswagen Amarok 2011 Workshop Manual page 15

4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Carefully cut through cable ties -arrows-.
– Lay wiring harness on engine and secure.
– Release clip -2-, disconnect water hose -1- from radiator -3-
at bottom right and allow water to drain.
– Disconnect water hoses -2 and 3- from radiator -1- at top left.
– Disconnect water hoses from water pipes.
– Pull line -2- out of brake servo.
– Open clip -1- and remove coolant hose -3-.
– Remove vane pump for power steering with hoses connected
and secure to body ⇒ Running gear, axles, steering; Rep. gr.
48 ; Removing and installing vane pump .
Amarok 2011 ➤
1. Removing and installing engine
9