Volkswagen Amarok 2011 Workshop Manual page 75

4-cylinder injection engine (2.0 l direct injection engine, turbocharger) - Edition 02.2011
– Turn vibration damper to „TDC" position -arrow- using coun‐
terhold -T10355- .
• Notch on vibration damper must align with arrow marking on
bottom cover for timing chains.
– Remove bolt for vibration damper using counterhold -
T10355- .
– Remove vibration damper.
Note
Always use thrust piece -T10368- when fitting bolt for vibration
damper to avoid damaging splines.
– Screw bolt for vibration damper and thrust piece -T10368-
back in.
Caution
Risk of damage to engine.
♦ To avoid disturbing valve timing, do not turn crankshaft out
of „TDC" position when bolt for vibration damper is re‐
moved.
– Remove guide roller -1-.
– Remove bolts -arrows- and pull guide tube for oil dipstick out
of timing chain cover.
– Remove bolts -1 ... 15-.
Amarok 2011 ➤
69
2. Chain drive