Table of Contents
Advertisement
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
3
Safety information
⇒ "3.1 Safety precautions during work on fuel system",
page 4
⇒ "3.2 Safety precautions when using testers and measuring in‐
struments during a road test", page 4
⇒ "3.3 Safety precautions when working on the cooling system",
page 5
⇒ "3.4 Safety precautions when working on ignition system", page
5
3.1
Safety precautions during work on fuel
system
WARNING
The fuel line is under pressure.
Fuel poses danger of injury to eyes and skin.
Wear protective goggles and protective clothing to avoid injury
and contact with the skin. Wrap a cloth around the connection
before loosening hose connections. Then reduce pressure by
carefully opening the connection.
For reasons of safety, the power supply to the fuel pump must
be interrupted before the fuel system is opened. The fuel pump
would otherwise be activated when the driver's door is opened
or the ignition is switched on. Use one of the following options
to interrupt the power supply:
♦ Disconnect battery
or
♦ Remove fuse for fuel pump - G6-
or
♦ Pull connector off fuel delivery unit flange
Caution
Observe the following during all assembly work, particularly in
the engine compartment due to the restricted space:
♦ Route lines of any kind and cables so that original routing
is restored.
♦ Ensure that there is sufficient clearance to all moving or
hot components.
3.2
Safety precautions when using testers
and measuring instruments during a
road test
Note the following if testers and measuring instruments have to
be used during a road test:
♦ Testers and measuring instruments must always be secured
to rear seat and operated by a second person from this loca‐
tion.
4
Rep. gr.00 - Technical data
Advertisement
Table of Contents
