Ethernet Communication - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Common Items
1.2.2

Ethernet communication

1. Outline
Network Range (Only within LAN)
SNTP server
FX -ENET-ADP
Local
3U
station
2. Applicable PLCs
PLC
Communication
applicability
*1. The FX
3U
3. Applicable software
Use the following version when setting the FX
Product name
GX Works2
*2. Ver. 1.492N or later supports the FX
Ver. 1.87R or later supports the FX
Caution
Setting and others are disabled when using nonapplicable versions.
4. Communication targets
Ethernet-compatible equipment
5. Function
The FX -ENET-ADP can connect FX
3U
such as personal computer via Ethernet (100BASE-TX or 10BASE-T) using TCP/IP or UDP communication
protocol.
6. Applications
1) Collects and changes the PLC data.
(Communication using the MELSEC communication protocol)
2) Reads, writes and verifies programs, and monitors and tests device values in the main unit remotely.
(Communicates with GX Works2 via Ethernet through MELSOFT connection.)
3) Executes monitoring remotely using a web browser.
(The data monitoring function enables monitoring the information and device values in the main unit and
FX -ENET-ADP using a web browser.)
3U
A-6
External device
:Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—:Not applicable
FX (FX),FX FX FX
2 2C 0N
— —
-ENET-ADP Ver. 1.20 or later is applicable to the FX
Model name
SWDNC-GXW2-E
3S
For details, refer to FX
Router
Hub
External device
GX Works2
,FX ,FX FX ,FX
1S 1N 1NC 2N
— —
-ENET-ADP or connecting using MELSOFT:
3U
Applicability
*2
Ver. 1.73B or later
PLC.
3S
, FX PLCs.
3G 3GC
, FX , FX , FX , FX
3G 3GC 3U
1.2 Outline and Features of Communication Types
-ENET-ADP User's Manual.
3U
FX FX FX
2NC 3S 3G, 3GC

*1
(Ver. 2.00 or

later)
PLC.
3S
Series PLCs to a high-order system
3UC
1 Introduction
FX , FX
3U 3UC

(Ver. 3.10 or
later)