Communication Type Applicability In Plc - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Parallel Link
1.3

Communication Type Applicability in PLC

1.3.1 Applicable versions
The communication types are applicable in the following versions.
 : Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—: Not applicable
PLC
FX Series
3UC
FX Series
3U
FX Series
3GC
FX Series
3G
FX Series
3S
FX Series
2NC
FX Series
2N
FX Series
1NC
FX Series
1N
FX Series
1S
FX Series
0N
FX Series
0S
FX Series
0
FX Series
2C
FX (FX) Series
2
FX Series
1
1.3.2 Version check
The PLC version can be checked by reading the last three digits of device D8001.
For a detailed description of the version check, refer to A. Common Items Section 4.2.
1.3.3 Products whose production was stopped
Production was stopped for some models of MELSEC-F Series PLCs and programming tools described in
this manual. For models whose production was stopped, refer to Appendix A.
To see the latest available products, refer to the general catalog.
Applicability (applicable version)






 (Ver. 1.04 or later)



 (Ver. 1.20 or later)
—
—


—
1.3 Communication Type Applicability in PLC
Remarks
The link device range is limited.
The link device range is limited.
The link device range is limited.
Parallel link is not provided.
Parallel link is not provided.
The high-speed link mode is supported in Ver. 3.07 and
later.
The high-speed link mode is supported in Ver. 3.07 and
later.
Parallel link is not provided.
1 Outline
A
B
C
D
E
F
G
H
I
Apx.A
C-5