Mitsubishi Electric FX3U-232-BD User Manual page 772

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
2. Modem on the personal computer side for remote access
The table below shows modems whose operations are already confirmed. Input and set the AT command shown
below using a programming tool in the personal computer on the remote access side.
FXGP/WIN has a command to initialize the PV-AF288, PV-AF3360 (manufactured by AIWA CO., LTD.), ME3314B,
ME5614D, ME5614E and ME5614E2
by setting a parameter.
Manufacturer
Modem
model name
Manufactured by I-O DATA DEVICE, INC.
DFML-560ER AT&C1E0Q0S0=2&K0&D0
Manufactured by AIWA CO., LTD.
*1
PV-AF288
*1
PV-AF3360
*1
ATE0S0=2&K0&D0
PV-BF5606
Manufactured by OMRON Corporation
*1
ME3314B
*1
ME5614E
ATE0S0=2&K0&D0
ME5614E2
*1*2
*1
ATE0S0=2&K0&D0
ME5614D
*1. Production is finished as of August, 2010.
*2. When used the FXGP/WIN, select the model "ME5614E".
I-22
*2
(manufactured by OMRON Corporation). This command can be used only
AT command setting for modem on personal computer side for remote access
GX Works2 GX Developer
(SWDNC (SWD5C
-GXW2) -GPPW)
—
—
—
For the setting procedure, refer to Chapter 6.
FX-PCS/WIN
—
Select this model (AT command is shown for reference)
ATE0S0=2Q0V1&M4\J0\Q0
Select this model (AT command is shown for reference)
ATE0S0=2Q0V1S15=8&H0&R1
Select this model (AT command is shown for reference)
ATE0S0=2&K0
Select this model (AT command is shown for reference)
ATE0S0=2Q0V1S15=8&H0&R1
Select this model (AT command is shown for reference)
ATE0S0=2&K0W0
Select this model (AT command is shown for reference)
ATE0S0=2&K0W0
3 System Configuration and Selection
3.3 Selecting Modem
Remarks
Modem version: F/W
Ver. 2.300
Modem version: F/W
Ver. 2.300