Details Of Related Devices - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Computer Link
9.2

Details of Related Devices

The devices described below are used for computer link.
9.2.1 Serial communication error [M8063 and M8438]
These devices turn ON when an error occurs during serial communication.
1. Detailed contents
These devices work as the serial communication error flags.
In all PLCs except FX
For FX , FX
3G 3GC
In FX , FX
3G 3GC
When serial communication error flags turn ON, a corresponding error code is stored in D8063 and D8438.
2. Cautions on use
Serial communication errors code are not cleared even when communication is restored.
Serial communication errors are cleared in FX
turned off and on.
Serial communication errors are cleared in other PLCs when the mode is switched from STOP to RUN.
9.2.2 Communication setting keep [M8120]
Set this device to ON in a sequence program so that the communication setting is kept (for FX
1. Detailed contents
In an FX PLC, set M8120 to ON in a sequence program so that the communication format setting and
0N
station number settings are kept.
2. Cautions on use
In an FX PLC, the communication setting status is kept only when M8120 is set to ON.
0N
In any PLC other than FX
9.2.3 Global function ON [M8126 and M8426]
These devices turn ON/OFF when the PLC receives the global command (GW) from personal computers.
1. Detailed contents
When the computer sends the global command, the global ON flag turns ON or OFF in all connected stations.
In all PLCs except FX
OFF.
For FX , FX
3G 3GC
In FX , FX
3G 3GC
2. Cautions on use
The global ON flag turns OFF from ON when the PLC power is turned OFF or when the PLC mode is
changed to STOP.
9.2.4 On-demand send processing [M8127 and M8427]
These devices remain ON while the on-demand function is being executed.
1. Detailed contents
When a PLC gives data sending request using the on-demand function, the on-demand send processing flag
turns ON.
In FX (FX), FX
2
communication port ch1, M8127 turns ON/OFF.
In FX FX
3G, 3GC
2. Cautions on use
Use these devices for interlock to prevent generation of two or more on-demand requests at the same time.
D-92
, FX , FX and FX
3G 3GC 3U
, FX and FX PLCs using the communication port ch1, M8063 turns ON.
3U 3UC
, FX and FX PLCs using the communication port ch2, M8438 turns ON.
3U 3UC
PLCs, setting of M8120 is not required.
0N
, FX , FX and FX
3G 3GC 3U
, FX and FX PLCs using the communication port ch1, M8126 turns ON or OFF.
3U 3UC
, FX and FX PLCs using the communication port ch2, M8426 turns ON or OFF.
3U 3UC
, FX , FX and FX
2C 2N 2NC
, FX and FX PLCs using the communication port ch2, M8427 turns ON/OFF.
3U 3UC
PLCs using the communication port, M8063 turns ON.
3UC
, FX , FX , FX
3S 3G 3GC
PLCs using the communication port, M8126 turns ON or
3UC
PLCs and in FX , FX
3S 3G
9.2 Details of Related Devices
and FX PLCs when the power is
3U 3UC
, FX and FX PLCs using the
3GC 3U 3UC
9 Related Data
PLCs).
0N